Workforce News

Workforce

Creators Wanted Makes an Impact at SkillsUSA

The Creators Wanted tour landed in Atlanta last week for the SkillsUSA National Leadership and Skills Conference—the largest gathering of the America’s future skills workforce.

Over the course of the three-day program, the tour, an initiative of the NAM and the Manufacturing Institute, helped change attitudes and challenge misconceptions about manufacturing, opening up a new world for some of the country’s most talented rising workers.

By the numbers: The tour’s SkillsUSA stop, sponsored by Honda, Snap-on, FactoryFix and Union Pacific, helped share the story of modern manufacturing with many of the brightest career mentors and technical education students in the United States.

  • 15,000 people attended the event, including many career and technical education students, educators and parents.
  • More than 1,500 people took part in the Creators Wanted immersive experience at SkillsUSA.
  • More than 120,000 students and career mentors signed up to learn more about modern manufacturing careers during the tour stop in Georgia.

More participants: Other leading manufacturers were also in attendance, engaging students with information about careers in manufacturing. A few of the participants included Caterpillar, John Deere/Korematsu, Volvo NA Group, Vermeer Corp., Toyota, Cummins, Penske and 3M.

A special guest: Snap-on Chairman and CEO Nick Pinchuk dedicated a full day to inspiring students and educators. The NAM executive committee member and Manufacturing Institute board member emphasized the “Creators Wanted” mantra in order to remind participants that manufacturers aren’t just recruiting workers—they’re inspiring and empowering creators. 

Local coverage: The visit made waves in Georgia, where it was covered on Fox 5’s Good Day Atlanta:

  • “A huge turnout down here,” said Fox 5’s Paul Milliken, who had multiple live hits at the Creators Wanted immersive experience. “These students are so talented, so incredible … the future of America’s skilled workforce.”
  • “This conference—it’s just a really incredible opportunity for these future workforce leaders to come together, meet each other, network and compete.”

Overheard at the event: Plenty of participants shared their excitement, emphasizing opportunities to connect with employers, learn about new skills and find paths to future careers.

  • “These are viable careers. They are jobs that you can make quite a bit of money right from the beginning, and at the same time you’re learning core skills that you can carry on for the rest of your life.”
  • “We’ve got tons of jobs out there across the U.S. Everybody is looking for talented individuals.”
  • “You can explore … different careers that you want to do, [to] help you become a more successful adult in the future.”

The big picture: Over the course of the Creators Wanted Tour, which launched a year and eight months ago:

  • 4 million students and career mentors have signed up online to learn more about modern manufacturing careers.
  • Over 10,000 students and more than 3,000 career mentors have participated in our immersive experience, with 84% reporting a significantly improved view of modern manufacturing careers.
  • The tour has received $5.35 million in positive earned media and 150 million digital impressions. 

Making an impact: “Interacting with the students, educators and caregivers, we could truly feel the impact we’re making,” said Chrys Kefalas, managing vice president of brand strategy at the NAM. “This isn’t just about changing minds—we’re creating dreams and altering life trajectories.”

What’s next: The tour keeps on rolling this fall to Minneapolis and St. Paul, Minnesota, and Circleville, Ohio. You can also keep an eye out for new online resources that are coming out this summer, or browse the more than 330,000 open manufacturing jobs and 150,000 training programs listed online.

Workforce

“Listen and Act”: Bishop-Wisecarver Shares Retention Secrets


Keeping her employees happy and engaged is something Pamela Kan, president and owner of Bishop-Wisecarver, takes seriously.

And for good reason. Workforce retention is a pain point for many manufacturers and consistently cited, along with recruitment, as a top business challenge in the NAM’s Manufacturers’ Outlook Survey.   

For Kan, meeting this challenge starts with getting her employees’ input—what’s on their minds, their career aspirations and the ways they think the company can improve. Then she acts on it. 

Garnering feedback: To assess engagement, Bishop-Wisecarver surveys its employees and calculates an employee net promotor score, which is an internal measurement of employee satisfaction. Kan, the executive director of culture and people and department heads then discuss the areas that need improvement.

  • “We share with employees where we have friction points or where things need to change,” Kan said. “We make that very visible. We then start checking these things off the list.”

The company also offers employees many different opportunities to share what’s on their minds, through informal check-ins, team huddles, employee lunches and skip-level meetings.

  • “Every single one of these times we are asking for feedback,” Kan emphasized. “We document it and follow up on it, because whenever you ask for feedback and you don’t then respond with changes or next-level discussions, you break the trust with your employees that you care about them.”
  • “I reach out to new employees at the 60-day mark to see how it’s going,” she continued. “One actually reached out and said, ‘yeah, we need to talk.’ It was all positive. Some things he didn’t quite understand, being new [to the company], and it showed me some gaps in our onboarding process.”

Conducting reviews: Instead of formal reviews, Kan says Bishop-Wisecarver has instituted quarterly check-ins, with the conversations often centering around career advancement.

  • “We’ve tried to create a career ladder that’s not just vertical, but allows for offramps where employees can explore different channels of the company,” said Kan.
  • “If somebody starts as an application engineer, that doesn’t mean they have to stay in engineering. They might want to go and try a position in sales, project management or marketing. We leave the door open.”

Other strategies: Kan has also implemented several other workplace practices to keep employees engaged. 

  • Recognizing employees: Through a program called “Bishop-Wisecarver Bucks,” employees receive a bank of bucks once a month that they can use to recognize others who have lived up to one of the company’s core values: preserve the family culture, deliver a signature experience, embrace a pioneering spirit and the need for speed. The company has an online portal where those receiving the bucks can purchase company merchandise, gift cards or tickets to events.
  • Inspiring the next generation: Based on feedback from her employees, Bishop-Wisecarver partners with multiple nonprofits that support students in their local community. One of these is FIRST Robotics, which inspires young people to be science and technology leaders and innovators, as well as well-rounded contributors to society, by engaging them in mentor-based research and robotics programs.
  • Reimagining the workspace: After polling her employees, Kan redesigned an entire building to reflect the workstyles and needs of her team. For example, the second floor of the building is now a large training space, where tables, chairs and white boards have wheels for easy configuration for company-wide meetings to multiple small groups. To break down the silos of separate lunchrooms, she created Wisecarver Way Café, complete with a pool table and ping-pong table. The company also has a space for employees to do yoga, allows them to bring their dogs to work and offers gym memberships.
  • Offering support: Bishop-Wisecarver also has a program called Life Guides, which connects employees undergoing hardships with peer mentors who have been through similar difficulties, such as caring for an elderly parent or coping with a death in the family.

The last word: “Don’t ask your team for feedback and then do nothing with it,” Kan reinforced. “That’s what creates disengaged team members. Sometimes we don’t get it right, but at least we’ve tried.”

The Manufacturing Institute has many initiatives to help employers retain and develop their teams. For a deeper dive, check out this study by the MI on improving retention and employee engagement. The MI will also explore retention challenges and solutions at its Workforce Summit in Atlanta on Oct. 16–18. Click here for more information.

News

Creators Wanted Tour Revs Up at Indy 500

The Creators Wanted Tour, a joint project of the National Association of Manufacturers and the Manufacturing Institute, set new records at the “Greatest Spectacle in Racing”: the Indianapolis 500.

By the numbers: The tour’s 17th stop, generously sponsored by Snap-on, allowed nearly 1,600 young fans and their families to experience modern manufacturing first-hand.

  • In addition, more than 72,000 students and career mentors signed up online to learn more about manufacturing careers.
  • So far, over 10,000 students have taken part in the immersive experience since its launch in October 2021, with 84% of participants reporting an improved view of modern manufacturing careers. Online signups have now surpassed 1.3 million.

What they’re saying: “’Creators Wanted’ is a critical message to all young people, parents, caregivers and educators across our country,” said Snap-on CEO Nick Pinchuk, who is also an NAM executive committee member and MI board member.

  • “Snap-on is proud to bring the Creators Wanted Tour to the [Indianapolis Motor Speedway] and the Indianapolis 500, showing younger race fans and their families that manufacturing is an exciting place where the opportunities are many, the careers are rewarding and the lives are filled with the pride of being part of something greater than yourself,” he continued.
  • NAM President and CEO and MI Chairman of the Board Jay Timmons added, “The world’s largest single day sporting event met the nation’s largest manufacturing campaign—and it revved up enthusiasm about modern manufacturing in a big way with more students and their families.”

Behind the scenes: Alongside the Creators Wanted experience at Fan Midway at the Indianapolis Motor Speedway (IMS), fans were also treated to a number of other interactive exhibits.

  • These included: Snap-on’s “Makers and Fixers” tent; Honda’s racing simulator and vehicle fleet; the IMS Kids Zone where young fans raced on their own track; and FactoryFix’s activities and resources to help people find their path into manufacturing careers, including its work through CreatorsWanted.org.
  • “Seeing folks at Indy curious about our ‘Creators Wanted’ campaign was such a great confirmation of the research and testing we did to arrive at the name for this effort,” said Erin Streeter, Executive Vice President of the NAM. “When parents and kids asked us about the type of creators we need in manufacturing, it just showed how spot-on our message really is.”
  • The NAM video team captured some of the fan sentiment with this video.

The big picture: “These tour stops often serve as the first interaction individuals have with the NAM and the MI, and the impression is powerful,” said Chrys Kefalas, Managing Vice President of Brand Strategy at the NAM. ” These meaningful personal interactions create lasting impressions and underscore the industry’s value.”

Workforce

Army, Navy, Air Force, and Marines! Heroes MAKE America is Reaching More Veterans

When service members leave the military, manufacturers are quick to say: “Come on over!” Military skills are usually a great match for manufacturing careers, which require attention to detail, technical abilities and creative thinking. And there’s no better matchmaker than the Manufacturing Institute’s Heroes MAKE America initiative, which since 2018 has been offering training certification programs and career courses to transitioning service members and veterans.

Today, HMA not only serves service members on military installations across the country but has also expanded its reach via a virtual training program.

Widening the reach: Now in its second year, the virtual training program has allowed HMA to impact service members on a national scale.

  • For the first time, members from four branches—Army, Air Force, Marine Corps and Navy—are participating in the same class at the same time.
  • Additionally, the geographic range of participants has increased to comprise students located far and wide, including in Alaska, Arizona, Delaware, Kansas and Kentucky.
  • The program has reached more than 120,000 prospective students through local transition assistance, HMA’s LinkedIn and Facebook presence and the SkillBridge website.

How it works: HMA partnered with Texas State Technical College to create a virtual nine-week training and certification program.

  • Participants earn nationally portable, industry-recognized Certified Production Technician certification as well as an OSHA 10 certification.
  • Through Heroes Connect, HMA also partners with sponsors like Johnson & Johnson, The Caterpillar Foundation, Amazon, Howmet Aerospace, WestRock, Saint-Gobain, Atlas Copco, Cargill, FUCHS Lubricants Company, C.H. Guenther & Sons, Honda Foundation, Niagara Bottling and the NAFEM, PPI and SEMI Associations to connect program graduates and members of the military community with manufacturers.

What we’re saying: “It’s exciting to see members from four branches of the military all in one virtual classroom together,” said Heroes MAKE America Senior Program Manager Katie Bowerman. “There’s a lot of strength in that kind of diversity.”

Spread the word: Do you have jobs for which HMA students might qualify, or know of a service member who would want to join the program? The HMA virtual program is open to any transitioning service member who is in their last six months of active-duty service, as well as to veteran and active-duty military spouses. For more information, contact [email protected].

General

Chart’s Jillian Evanko on the Adventure of Manufacturing Jobs

If you’re looking for a career with no “typical days,” Jillian Evanko would advise you to choose manufacturing.

Mixing it up: Every workday offers something new and exciting for Evanko, the president and CEO of Chart Industries, a global leader in the design, engineering and manufacture of process technologies and equipment for the clean energy and industrial gas markets.

  • “Whether I have a customer meeting, an investor conference, a keynote speaking event, a panel session or meetings with my executive team, every single day looks different to me, which is what I love about my job,” said Evanko.

Business sense: It was a talent for business that led Evanko—a 2023 honoree of the Manufacturing Institute’s Women MAKE Awards, which recognize outstanding female talent in the manufacturing sector—to the industry.

  • “Early in my career I worked for Honeywell and Dover Corporation in various financial and operational roles,” said Evanko, who holds a Master of Business Administration from the University of Notre Dame.
  • Once she entered the field, she found that she genuinely enjoyed it—and she’s here to stay. “The fast-moving, exciting nature of the manufacturing industry is what keeps me in it,” she said. “There is always an opportunity to innovate or make a technological development, and you really get to see the impact of what you produce making a difference in everyday life.”

 A changing industry: Evanko has seen manufacturing evolve for the better since she got her start, especially for women employees.

  • “In the past few years, I think the world has come to recognize that there is a direct correlation between diversity in manufacturing and increased innovation,” she said. “By diversifying a workforce, you gain access to new thoughts, ideas and perspectives.”
  • “Since I’ve begun my career, I have seen more women enter the manufacturing industry, and even within my past five years at Chart, we are continuing to see more women taking on more senior roles, including operations and manufacturing roles.”

Growing company: In recent months, Evanko has been even busier than usual, as Chart Industries recently completed its acquisition of Howden, an air- and gas-handling products manufacturer and services provider.

  • The acquisition, Chart’s largest to date, has doubled the size of the company’s engineering team. It “helps us expand into new geographies and gain access to new customers, and it provides us with a much more expansive Nexus of Clean™ offering,” she said, referring to the firm’s array of products and solutions for a more sustainable future.

The best, period: Evanko devotes much of her time to helping and educating others. One example of this is the way she provides her daughter’s Girl Scout troop with access to entrepreneurial speakers, as well as information about the world of manufacturing. She has developed a mantra that keeps her constantly striving for improvement:

  • “I like to say that I don’t want to be the best female CEO, I want to be the best CEO,” she said. “For women in manufacturing looking to grow in their careers, aim to be the best you can be despite gender, age or background.”
  • “Be confident in what you bring to the table and never underestimate your abilities,” she continued. “Listen to others and empower them to bring their ideas forward. And never underestimate the power of simply being kind.”
Workforce

Students Build the Future in Ohio

Where can you “race to the future” in a mobile, immersive manufacturing experience, try your hand at cutting-edge technology and get free career advice from top professionals? At a Creators Wanted stop, of course.

Participants at last week’s Creators Wanted stops in Marysville and Columbus, Ohio, did all this and more.

Two stops, one week: The Honda Heritage Center was the site of two days of educational fun last Wednesday and Thursday, after which the Creators Wanted Tour continued on to the COSI Science Festival in Columbus, Ohio’s largest STEM event, on Saturday.

  • The stops were the 15th and 16th, respectively, on Creators Wanted’s nationwide tour, an initiative of the NAM and its 501(c)3 workforce development and education affiliate, the Manufacturing Institute.
  • The tour aims to shore up the manufacturing workforce by 600,000 workers, increase the number of students enrolling in technical and vocational schools or reskilling programs by 25% and boost the positive perception of the industry among parents from 27% to 50%—all by 2025.
  • Nearly 1,000 kids and adults came through the Creators Wanted immersive experience during its three days in Ohio, and 35,000 students and career mentors signed up to learn more about modern manufacturing careers, increasing the network to 1.2 million nationwide.

Sites to behold: More than 300 students from central Ohio schools toured the Honda Heritage Center on Wednesday and Thursday.

  • Students learned about the American Honda Motor Company’s rich history of innovation, beginning in 1959, and toured the Honda Technical Development Center, where Honda associates advance their skills in high-tech manufacturing.
  • Tour sponsor FactoryFix was on hand, too, helping students explore pathways to manufacturing careers through information handouts and in-person Q&As with company representatives.

Theme-park lines: At COSI, the Creators Wanted experience had the festival buzzing, with attendees lining up to take their turn. More than 675 kids and adults moved through the unit in just six hours.

  • “We built this experience to excite future creators and their career mentors like parents,” said NAM Managing Vice President of Brand Strategy Chrys Kefalas, who was onsite with the tour. “I’m not sure anyone fully anticipated how much of an attraction we’d be with the immersive experience—it’s a huge draw.”

A big commitment: Tour-stop host Honda—which has been instrumental in the launch and continuation of Creators Wanted—announced that it will increase its overall commitment to the Creators Wanted campaign to $2.25 million through 2025.

  • “Creators Wanted is a great opportunity to showcase what the modern manufacturing environment is like and what the career opportunities are,” said American Honda Motor Company Executive Vice President Bob Nelson. “And there are many career opportunities for everyone.”
  • “Honda’s incredible support and leadership has empowered our innovative campaign to thrive—to inspire students, to positively affect parents and teachers and, now with Creators Connect, to change even more lives,” said NAM President and CEO and MI Chairman of the Board Jay Timmons.
  • Sara Tracey, managing director of workforce services for the Ohio Manufacturers’ Association, which participated in the events, added, “There are so many opportunities [in manufacturing] for people, regardless of what their interests are.”

“Build the future”: At both the Honda Heritage Center and COSI, there was plenty for participants to do as well as see.

  • Students, parents and other attendees from local communities got the chance to use some of the latest items produced by manufacturers. These included Honda’s virtual-reality paint simulator and Honda’s safety car interactive display, as well as the many hands-on manufacturing challenges in the Creators Wanted mobile experience.
  • “Know that there is a place for you in manufacturing to put whatever your skills and interests and passions are to work to build the future,” said MI President and Executive Director Carolyn Lee.

A great place to work: Many Honda associates—eager to share their positive experiences—participated in the week’s events, too, and had great things to say about modern manufacturing careers while on the ground at COSI.

  • “I don’t think people realize how complex a vehicle is,” said one participating Honda associate. “The work and the people behind it, and the effort it takes to bring it to market—I can’t express how much fun that really is.”
  • Said another, “I like that every day is a little bit different.” 

Behind the scenes: Interested in seeing how the Creators Wanted activation at COSI unfolded? Check out the NAM’s Instagram story from this weekend here.

MI Insider

Second Chance Hiring Toolkit for Local Communities

The MI released our latest resource: the Second Chance Hiring Toolkit for Local Communities. Through interviews with employers, partners, and local stakeholders, as well as a review of other efforts across the country, the MI developed the toolkit to support local leaders– or “hub organizations”– to design and implement multi-employer second chance collaboratives in their region. The intended audience for this toolkit includes state and local manufacturing associations, chambers, and other locally-based organizations to build and implement a place-based second chance employment pilot program. Employers can also reference this toolkit for direction on how to get started with their own second chance hiring journey.

If you have questions, please reach out to Pooja Tripathi, Director of Workforce Initiatives at [email protected] for more information.

 

MI Insider

Solution Series: Recruitment Workshop

Solution Series: Recruitment Workshop

The MI recently convened a group of manufacturers to discuss recruitment challenges and identify ways to address them. After hearing from experts on topics ranging from the current labor market, second chance hiring, the gig economy and the importance of speed in recruitment, participants broke out into small groups to discuss the top challenges they were facing and brainstorm solutions.

KEY TAKEAWAYS:  

  • Determine who owns what part of the recruitment process as well as how team members will be held accountable.
  • Advertise the position effectively, streamline the application process and screen as many people in as possible.
  • Invest time and resources into sourcing talent.

Check out our recap article of the event here. Stay tuned for an in-depth summary report highlighting the solutions that manufacturers are testing and implementing to address recruitment challenges.

News

Union Pacific Railroad CFO Talks About Supporting Women Workers

When Jennifer Hamann went to college, she intended to be a fashion merchandising major—but she soon realized that it wasn’t for her.

“At the time, fashion merchandising was a combination of business and home economics,” said Hamann. “When I found out I had to sew, I dropped out.”

Instead, she pivoted to finance, which set her on the path to her current position as executive vice president and chief financial officer at Union Pacific Railroad. She was recently honored by the Manufacturing Institute—the NAM’s 501(c)(3) workforce development and education affiliate—with a Women MAKE Award, recognizing outstanding women working in the manufacturing industry.

A flexible career: When Hamann reflects on her time at Union Pacific, she sees flexibility and a willingness to try new things as a consistent theme—as when she shifted from a position on the audit staff to a role in human resources.

  • “The thing that I think is a great selling point about Union Pacific is that you can still get your paycheck from the same company, but you can make wholesale career changes over the course of your career,” said Hamann.
  • “I’ve done that. … I’ve taken on roles that were totally different than what I had gone to school for, or what I started doing when I came to Union Pacific. And I think that’s a real benefit to businesses like ours.”

Serving with pride: According to Hamann, the 161-year-old company’s workforce takes a great deal of pride in what they do and prioritizes a team-centered environment.

  • “There’s tremendous pride in the workforce,” said Hamann. “Our tagline is Building America, and that really is how we think of ourselves. Supporting so many parts of America’s economy and so many communities—that pride is a big deal.”

Pushing for diversity: Hamann was previously president and now serves as the executive adviser of Union Pacific’s employee resource group for women called LEAD (which stands for Lead, Educate, Achieve and Develop). The ERG is one of nine at the railroad that helps foster inclusion and cultural awareness by creating networks that develop Union Pacific’s workforce and its culture.

  • “One of the focus areas we’ve had as a [LEAD] group over the last several years is really reaching out into our field locations,” said Hamann. “If women can see other women in some of those roles that have been traditionally held by men, that helps give them greater confidence, and it helps in our overall recruiting and retention efforts to bring people into those jobs.”

Building a future: Hamann is proud of the work Union Pacific is doing to attract a diverse workforce, including by offering free college tuition for employees and by stressing pay equity and retention.

  • “Not only do I think Union Pacific is a great place to work, but we really want it to be a great place for more women going forward,” said Hamann. “When I think about the future, I’d love to see it be a future where the demographics of Union Pacific reflect the demographics of the country and the communities where we operate.”

The last word: “This is a company with a very supportive culture,” said Hamann. “We value diversity, equity and inclusion. We want people to succeed. We have opportunities to build your network. Give us a try and see what you think.”

More reading: View the full list of this year’s Women MAKE Award Honorees and Emerging Leaders here, and learn more here about the Women MAKE Mentorship Program to help inspire the next generation of female talent.

Workforce

“The Best Thing I Ever Did”: Creators Wanted Stops in Louisiana

It was the 14th stop of the Creators Wanted Tour, but the level of enthusiasm among attendees made it seem like the first.

What happened: This week’s visit of the award-winning mobile immersive experience—an initiative of the NAM and its 501(c)3 workforce development and education affiliate, the Manufacturing Institute—to the Baton Rouge, Louisiana, area was an unequivocal hit.

  • Hosted by Dow with the participation of Union Pacific, the Louisiana Association of Business and Industry, FactoryFix, River Parishes Community College and BASF, the event drew more than 500 students to the college’s Westside Campus in Plaquemine, Louisiana. Students came from the college as well as area middle and high schools.
  • The digital campaign signed up more than 26,000 new students and career mentors in Louisiana to learn more about modern manufacturing. In addition, Dow (a third-time Creators Wanted host) and Union Pacific had team members on-site to answer students’ questions about their careers.

High tech: Dow displayed drones and robots—including one named Spot—to give students a peek at some of the cutting-edge technologies they might expect to work with in manufacturing. Meanwhile, Union Pacific offered 3D virtual tours of company operations.

Manufacturing is everywhere: River Parishes Community College Chancellor Quintin D. Taylor, who gave opening remarks at the kickoff event, emphasized the extent to which manufacturing touches everyone each day—and how fulfilling a career in it can be.

  • “Even the toothpaste we all used this morning was made in a facility that does manufacturing,” Taylor said. “Should a time come in your life where you decide to have a family, you have to be gainfully employed to take care of your family. Manufacturing is just one of many careers, quite frankly, that can help you do that.”

“Be somebody big”: Union Pacific Executive Vice President of Marketing and Sales Kenny Rocker seconded that sentiment.

  • “Who wants to make the world better and make a lot of money doing it?” Rocker asked the audience to a show of numerous hands. With a manufacturing career, “you can be the GOAT in your family,” he continued, referring to the acronym meaning “Greatest of All Time.” “You can be somebody big in your family.”
  • Stay tuned: Union Pacific will host a Creators Wanted stop in the Minneapolis–St. Paul area in the fall. 

Creators required: There’s an acute need for more workers in manufacturing, MI President and Executive Director Carolyn Lee said, and there’s something in it for everyone.

  • “I can promise you if you are interested in designing, building, solving, creating things, fixing things with your hands, just figuring stuff out, there is a home for you in manufacturing,” she said.
  • Lee cited research by the MI and Deloitte that found if current trends continue, manufacturers will need to fill some 4 million jobs by the end of this decade.

Autograph-worthy: Attendees were so inspired by the kickoff-event remarks of Dow Chairman and CEO (and NAM Board Chair) Jim Fitterling—who spoke about students’ opportunities to do something historic in their careers—that several requested his autograph.

  • “The world’s going through one of the biggest changes since we industrialized the United States,” said Fitterling, who along with NAM President and CEO Jay Timmons wrote an op-ed about the tour that appeared in the Louisiana Policy Review this week.
  • “We’re about to go through another … massive change because we’re going to reindustrialize this country. And that means you are going to get to work on some of the biggest projects that we have ever seen in the world.”
  • Fitterling, who personally took students through the Creators Wanted immersive experience before his talk, emphasized, “We’re here to see you. We’re interested in you. We want you to have a great future, and we want you to have … opportunities.”

“I’m still having fun”: Panel discussions featured leaders and team members from Dow as well as Turner Industries, giving students a more in-depth perspective about modern manufacturing careers.

  • During an on-stage discussion with Fitterling, Dow Senior Lead Site Manufacturing Director Crystal King told the audience how she came to choose engineering: her mother chose it for her.
  • “When I was in 10th grade, my mom asked me what did I want to do,” King said. She had said she wanted to go into education because her mother was a teacher. Then her mother “explained that when she went to college, there were only two things that, as an African-American female, she could be. One was a teacher, and one was a nurse. And I needed to do something other than either one of the two of them.”
  • Despite thinking she “would hate” being an engineer, King loved it—and she still loves it. “This is the best job in the world,” she told the audience. “I tease Jim [Fitterling]—I say, ‘When I stop having fun, I’m going home.’ I’m still having fun.”

The reception: In addition to a student who was “left … speechless” by the week’s events and another who called Creators Wanted “the best thing I ever did,” the tour stop had social media abuzz with praise for the initiative:

  • “Thank you to #CreatorsWanted for hosting our students over the past two days,” tweeted White Castle High School. “The students had a great time learning and building excitement about modern manufacturing careers.”
  • “Our Juniors and Seniors are having a fantastic time at #creatorswanted today!” tweeted Plaquemine High School. “They’re expanding their knowledge of the manufacturing industry and workforce, while also getting a chance to tour RPCC. A big thank you to #Creatorswanted, Dow and RPCC for this opportunity!”

Coming up: Creators Wanted will travel to Marysville and Columbus, Ohio, next week for stops at the Honda Heritage Center and the COSI Science Festival, sponsored by Honda. Later in May, the tour goes to the Indy 500 in Indianapolis.

Creators Wanted in action: See here, here and here for exciting footage of this week’s tour stop, including the remarks of LABI Interim President and CEO Jim Patterson.

View More